MAESC 2012
Manufacturing
May 1, 2012 @ Christian Brothers University
TENTATIVE PROGRAM OVERVIEW
|
Time |
Track 1 |
Track 2 |
Track 3 |
Track 4 |
Track 5 |
|
7:45 8:00 a.m. |
Check-in & On-site Registration (Assisi Hall
Lobby) |
||||
|
8:00 8:50 a.m. (0.5 PDH) |
Welcome & Keynote Address Session Welcome & Keynote Speaker Introduction (Malasri) Keynote Address Manufacturing
in Shelby County President & CEO,
Economic Development Growth Engine for Memphis & Shelby County (EDGE) Conference Overview (Shiue) (AH153) |
||||
|
8:50 9:00 a.m. |
Break |
||||
|
9:00 10:20 a.m. (1.5 PDHs) |
Session 1-A Lean Manufacturing Seminar (AH153) |
Session 2-A Wireless Communication Systems (AH155) |
Session 3-A Civil Engineering 1 (AH151) |
Session 4-A Mechanical Engineering (AH005) |
Session 5-A Green Engineering 1 (AH013) |
|
10:20 10:30 a.m. |
Break |
||||
|
10:30 11:50 a.m. (1.5 PDHs) |
Session 1-B (AH153) |
Session 2-B Electrical Engineering 1 (AH155) |
Session 3-B Civil Engineering 2 (AH151) |
Session 4-B Packaging 1 (AH005) |
Session 5-B Green Engineering 2 (AH013) |
|
11:50 a.m. 12:50 p.m. |
Lunch (Assisi Hall Lobby) |
||||
|
1:00 2:20 p.m (1.5 PDHs) |
Session 1-C Good
Manufacturing Practices Seminar (AH153) |
Session 2-C Electrical Engineering 2 (AH155) |
Session 3-C General Engineering 1 (AH151) |
Session 4-C Packaging 2 (AH005) |
Session 5-C Antenna for Space
Applications (AH013) |
|
2:20 2:30 p.m. |
Break |
||||
|
2:30 3:50 p.m. (1.5 PDHs) |
Session 1-D The Role of IT in Manufacturing Seminar (AH153) |
Session 2-D Computer Engineering (AH155) |
Session 3-D General Engineering 2 (AH151) |
Session 4-D Robotics (AH005) |
Session 5-D Recent Advances in Antenna
Design for Wireless Devices (AH013) |
Note: PDH =
Professional Development Hour (for registered professional engineers)
Sessions
|
Track |
Sessions |
Titles |
Authors |
|
|
Welcome/Keynote Address Moderator: Siripong Malasri |
Welcome Keynote Speaker Introduction Keynote Address: Manufacturing
in Shelby County Conference Overview |
Malasri Malasri Dulberger Shiue |
|
1 |
Session 1-A Seminar 1 Moderator: |
Lean Manufacturing |
House |
|
Session 1-B Seminar 2 Moderator: |
Babin |
||
|
Session 1-C Seminar 3 Moderator: |
Farmer |
||
|
Session 1-D Seminar 4 Moderator: |
The Role of IT in
Manufacturing |
Brittain |
|
|
2 |
Session 2-A Wireless Communication
Systems Moderator: |
|
Akhoirshida and Matalgah |
|
|
Akhoirshida and Matalgah |
||
|
|
Akhoirshida and Matalgah |
||
|
Session 2-B Electrical Engineering 1 Moderator: Khokiat Kengskool |
Power
Efficiency in Energy-aware Data Center Network |
Cheocherngngarn, Andrian,
Pan, and Kengskool |
|
|
|
Bermel |
||
|
Session 2-C Electrical Engineering 2 Moderator: |
Open
Source Home Security System |
Chu |
|
|
Portable
Electronic Device Detector |
Kelly |
||
|
Session 2-D Computer Engineering Moderator: |
Brooks |
||
|
ThyssenKrupp
SG200 Elevator Speed Governor Test System Prototype |
Denton |
||
|
Modeling
Nolan Engineering Building with Kinect |
Wellman |
||
|
3 |
Session 3-A Civil Engineering 1 Moderator: |
Design
of a Light Rail System in Metropolitan Memphis |
Boulanger, McGinnis, and Fox |
|
The
Dixon Gallery and Gardens Geomatics Project |
Caughman, Lin, McGinnis,
McGinnis, Skaggs |
||
|
Assessment of Backwash Water
Discharge Operation at Sheahan Pumping Station, Memphis, Tennessee |
Malasri |
||
|
Session 3-B Civil Engineering 2 Moderator: |
|
Elgohry, Ding, and Altinakar |
|
|
A
Study of the Flow Characteristics near Channel Confluence using CCHE2D/3D
Models |
Wei and Jia |
||
|
Seawater
Intrusion Model for Coastal Aquifer: Floridan Aquifer, Florida-USA |
Noosai and Fuentes |
||
|
Session 3-C General Engineering 1 Moderator: Ali Pourhashemi |
|
Johnson |
|
|
Madhavan and Pourhashemi |
|||
|
Session 3-D General Engineering 2 Moderator: |
|
Peterson, Magnuson, Calvert,
and Hall |
|
|
Power
and Temperature Monitoring |
Polischeck |
||
|
4 |
Session 4-A Mechanical Engineering Moderator: |
2D
Dual Layer Thermo-Fluidic Sensitivity Analysis and Topology Optimization |
McConnell and Pingen |
|
Low-cost
Plastic Injection Mold Design for Laboratory/Education Environment |
Shiue |
||
|
Age
Strengthening in Gray Cast Iron: Manufacturing Application, Truths, and Myths |
Teague |
||
|
Session 4-B Packaging 1 Moderator: Siripong Malasri |
Correlating
Peel and Burst Test Data for Unrestricted Pouches with Fin Seal Edges |
Brown, Ray, and Tsai |
|
|
|
Powers, Warren, and Brown |
||
|
Session 4-C Packaging 2 Moderator: Siripong Malasri |
Distribution
Tote Testing: A Weight Study |
Malasri, Aung, Edwards,
Archer, Moser, and Shiue |
|
|
Subsequent
Impact Acceleration Analysis of Air Pillow Study |
Malasri, Aung, Moser,
Warren, Jordan, Harvey, and Siow |
||
|
Session 4-D Robotics Moderator: |
Davis and Menezes |
||
|
|
Quinn, Maharrey, and
Porterfield |
||
|
5 |
Session 5-A Green Engineering 1 Moderator: Khokiat Kengskool |
|
Sterrett and Cain |
|
The
Conversion of Biomass to Liquid Fuel: Switchgrass Pyrolysis Process |
Noosai, Kengskool, and
Pipatmanomai |
||
|
Session 5-B Green Engineering 2 Moderator: |
Green
Optic Heart Rate Monitor |
Harrell |
|
|
|
Smith |
||
|
Session 5-C Antenna for Space
Applications Moderator: Ahmed Khidre |
Active-Feed
Beam-Scanning Reflectarray Antennas |
Nayeri, Yang, and Elsherbeni |
|
|
Phase
Range Limitations for Multi-Layer Transmitarray Antennas |
Abdelrahman, Yang, and
Elsherbeni |
||
|
Session 5-D Recent Advances in Antenna
Design for Wireless Devices Moderator: Payam Nayeri |
A
Printed Rectenna with Data Communication Function |
Yang, Elsherbeni, and Yang |
|
|
Reconfigurable
Microstrip Yagi-Uda Antenna with Steerable Circularly Polarized Beam |
Khidre, Yang, and Elsherbeni |
Index (By Author)
|
Authors |
Title |
Session |
|
Abdelrahman, Yang, and Elsherbeni |
Phase
Range Limitations for Multi-Layer Transmitarray Antennas |
Antenna for Space
Applications |
|
Akhoirshida and Matalgah |
|
Wireless Communication
Systems |
|
Akhoirshida and Matalgah |
|
Wireless Communication
Systems |
|
Akhoirshida and Matalgah |
|
Wireless Communication
Systems |
|
Babin |
Seminar 2 |
|
|
Bermel |
Electrical Engineering 1 |
|
|
Boulanger, McGinnis, and Fox |
Design
of a Light Rail System in Metropolitan Memphis |
Civil Engineering 1 |
|
Brittain |
The Role of IT in Manufacturing
Seminar |
Seminar 4 |
|
Brooks |
Computer Engineering |
|
|
Brown, Ray, and Tsai |
Correlating
Peel and Burst Test Data for Unrestricted Pouches with Fin Seal Edges |
Packaging 1 |
|
Caughman, Lin, McGinnis,
McGinnis, Skaggs |
Civil Engineering 1 |
|
|
Cheocherngngarn, Andrian,
Pan, and Kengskool |
Electrical Engineering 1 |
|
|
Chu |
Open
Source Home Security System |
Electrical Engineering 2 |
|
Davis and Menezes |
Robotics |
|
|
Denton |
ThyssenKrupp
SG200 Elevator Speed Governor Test System Prototype |
Computer Engineering |
|
Dulberger |
Manufacturing
in Shelby County |
Welcome/Keynote Address |
|
Elgohry, Ding, and Altinakar |
Civil Engineering 2 |
|
|
Farmer |
Seminar 3 |
|
|
Harrell |
Green Engineering 2 |
|
|
House |
Lean Manufacturing Seminar |
Seminar 1 |
|
Johnson |
General Engineering 1 |
|
|
Kelly |
Electrical Engineering 2 |
|
|
Khidre, Yang, and Elsherbeni |
Reconfigurable
Microstrip Yagi-Uda Antenna with Steerable Circularly Polarized Beam |
Recent Advances in Antenna
Design for Wireless Devices |
|
Madhavan and Pourhashemi |
General Engineering 1 |
|
|
Malasri |
Assessment of Backwash Water
Discharge Operation at Sheahan Pumping Station, Memphis, Tennessee |
Civil Engineering 1 |
|
Malasri, Aung, Edwards,
Archer, Moser, and Shiue |
Distribution
Tote Testing: A Weight Study |
Packaging 2 |
|
Malasri, Aung, Moser,
Warren, Jordan, Harvey, and Siow |
Packaging 2 |
|
|
McConnell and Pingen |
2D
Dual Layer Thermo-Fluidic Sensitivity Analysis and Topology Optimization |
Mechanical Engineering |
|
Nayeri, Yang, and Elsherbeni |
Antenna for Space
Applications |
|
|
Noosai and Fuentes |
Seawater
Intrusion Model for Coastal Aquifer: Floridan Aquifer, Florida-USA |
Civil Engineering 2 |
|
Noosai, Kengskool, and
Pipatmanomai |
The
Conversion of Biomass to Liquid Fuel: Switchgrass Pyrolysis Process |
Green Engineering 1 |
|
Peterson, Magnuson, Calvert,
and Hall |
General Engineering 2 |
|
|
Polischeck |
General Engineering 2 |
|
|
Powers, Warren, and Brown |
|
Packaging 1 |
|
Quinn, Maharrey, and
Porterfield |
Robotics |
|
|
Shiue |
Low-cost
Plastic Injection Mold Design for Laboratory/Education Environment |
Mechanical Engineering |
|
Smith |
|
Green Engineering 2 |
|
Sterrett and Cain |
|
Green Engineering 1 |
|
Teague |
Age
Strengthening in Gray Cast Iron: Manufacturing Application, Truths, and Myths |
Mechanical Engineering |
|
Wei and Jia |
A
Study of the Flow Characteristics near Channel Confluence using CCHE2D/3D
Models |
Civil Engineering 2 |
|
Wellman |
Computer Engineering |
|
|
Yang, Elsherbeni, and Yang |
A
Printed Rectenna with Data Communication Function |
Recent Advances in Antenna
Design for Wireless Devices |
Index (By Title)
|
Title |
Session |
|
2D
Dual Layer Thermo-Fluidic Sensitivity Analysis and Topology Optimization
by McConnell and Pingen |
Mechanical Engineering |
|
A
Printed Rectenna with Data Communication Function by Yang, Elsherbeni,
and Yang |
Recent Advances in Antenna
Design for Wireless Devices |
|
A
Study of the Flow Characteristics near Channel Confluence using CCHE2D/3D
Models by Wei and Jia |
Civil Engineering 2 |
|
Active-Feed
Beam-Scanning Reflectarray Antennas by Nayeri, Yang, and Elsherbeni |
Antenna for Space
Applications |
|
Age
Strengthening in Gray Cast Iron: Manufacturing Application, Truths, and Myths
by Teague |
Mechanical Engineering |
|
Assessment of Backwash Water
Discharge Operation at Sheahan Pumping Station, Memphis, Tennessee by Malasri |
Civil Engineering 1 |
|
Correlating
Peel and Burst Test Data for Unrestricted Pouches with Fin Seal Edges by
Brown, Ray, and Tsai |
Packaging 1 |
|
Design
of a Light Rail System in Metropolitan Memphis by Boulanger, McGinnis,
and Fox |
Civil Engineering 1 |
|
Distribution
Tote Testing: A Weight Study by Malasri, Aung, Edwards, Archer, Moser,
and Shiue |
Packaging 2 |
|
Error
Performance of BPSK Cooperative Wireless Communication Systems with
Co-Channel Interference in Nakagami Fading Channels by Akhoirshida and
Matalgah |
Wireless Communication
Systems |
|
Error
Performance of DBPSK Wireless Communication Systems with Co-Channel
Interference in Nakagami Fading Channels by Akhoirshida and Matalgah |
Wireless Communication
Systems |
|
Error
Performance of NCBFSK Wireless Communication Systems with Co-Channel
Interference in Nakagami Fading Channels by Akhoirshida and Matalgah |
Wireless Communication
Systems |
|
Green
Optic Heart Rate Monitor by Harrell |
Green Engineering 2 |
|
Good
Manufacturing Practices Seminar by Farmer |
Seminar 3 |
|
Lean Manufacturing Seminar
by House |
Seminar 1 |
|
Low-cost
Plastic Injection Mold Design for Laboratory/Education Environment by
Shiue |
Mechanical Engineering |
|
Manufacturing
in Shelby County by Dulberger |
Welcome/Keynote Address |
|
Modeling
Nolan Engineering Building with Kinect by Wellman |
Computer Engineering |
|
Open
Source Home Security System by Chu |
Electrical Engineering 2 |
|
Off-Grid
Cashew Roaster by Peterson, Magnuson, Calvert, and Hall |
General Engineering 2 |
|
Packaging
Analysis by Powers, Warren, and Brown |
Packaging 1 |
|
Phase
Range Limitations for Multi-Layer Transmitarray Antennas by Abdelrahman,
Yang, and Elsherbeni |
Antenna for Space
Applications |
|
Portable
Electronic Device Detector by Kelly |
Electrical Engineering 2 |
|
Power
and Temperature Monitoring by Polischeck |
General Engineering 2 |
|
Power
Efficiency in Energy-aware Data Center Network by Cheocherngngarn,
Andrian, Pan, and Kengskool |
Electrical Engineering 1 |
|
Power
Electronics Lab by Bermel |
Electrical Engineering 1 |
|
PringLess
Drains by Quinn, Maharrey, and Porterfield |
Robotics |
|
Project Green
Speed by Smith |
Green Engineering 2 |
|
Reconfigurable
Microstrip Yagi-Uda Antenna with Steerable Circularly Polarized Beam by
Khidre, Yang, and Elsherbeni |
Recent Advances in Antenna
Design for Wireless Devices |
|
Seawater
Intrusion Model for Coastal Aquifer: Floridan Aquifer, Florida-USA by
Noosai and Fuentes |
Civil Engineering 2 |
|
Sediment
Supply or Release by Elgohry, Ding, and Altinakar |
Civil Engineering 2 |
|
Six Sigma
Seminar by Babin |
Seminar 2 |
|
SLOT Security
by Brooks |
Computer Engineering |
|
SoutheastCon
2012 Hardware Competition Entry by Davis and Menezes |
Robotics |
|
Subsequent
Impact Acceleration Analysis of Air Pillow Study by Malasri, Aung, Moser,
Warren, Jordan, Harvey, and Siow |
Packaging 2 |
|
The
Conversion of Biomass to Liquid Fuel: Switchgrass Pyrolysis Process by
Noosai, Kengskool, and Pipatmanomai |
Green Engineering 1 |
|
The
Design and Optimization of Residential Fixed-Panel Photovoltaic Systems under
the TVA Green Power Switch Program by Sterrett and Cain |
Green Engineering 1 |
|
The
Dixon Gallery and Gardens Geomatics Project by Caughman, Lin, McGinnis,
McGinnis, Skaggs |
Civil Engineering 1 |
|
The Role of IT in
Manufacturing Seminar by Brittain |
Seminar 4 |
|
ThyssenKrupp
SG200 Elevator Speed Governor Test System Prototype by Denton |
Computer Engineering |
|
U.S.
Technology Transfer by Johnson |
General Engineering 1 |
|
Use
of Case Studies in Design Courses in Engineering by Madhavan and Pourhashemi |
General Engineering 1 |